[chirp_users] problems uploading or downloading to computer

[Michael D. Krochter]

Yes it's selected

On Mon, Oct 12, 2020, 4:09 PM Jim Unroe <rock.unroe at gmail.com> wrote:

> On Mon, Oct 12, 2020 at 5:42 PM Michael D. Krochter <mkrochta at gmail.com>
> wrote:
> >
> > Thank Jim...I have the v3.2.0.0 version install. Don't know what's going
> on.
> >
> >
>
> Mike,
>
> But is it selected? Windows will install the latest device driver and
> select it. Then you have to switch it back to the version you want.
>
> Also while you are in Device Manager, make sure that the COM port
> assigned to the programming cable didn't change. CHIRP remembers and
> selects the last port used even if it is no longer available. When
> this happens, you have to switch CHIRP to the new port.
>
> If the v3.2.0.0 device driver is still selected and CHIRP is set to
> the correct port and it still doesn't work, then what is the exact
> error message (or attach a debug.log file)?
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Michael Krochter at mkrochta at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201012/a4ea96ff/attachment.html