[chirp_users] problem with baofeng uv-5r

[Amnon Zohar]

there is a yotube video for the solution
https://www.youtube.com/watch?v=cf1VVN_0m3s

‫בתאריך יום ג׳, 13 בנוב׳ 2018 ב-1:00 מאת ‪Jim Unroe‬‏ <‪rock.unroe at gmail.com
‬‏>:‬

> On Mon, Nov 12, 2018 at 5:02 PM Amnon Zohar <amnon.zohar at gmail.com> wrote:
> >
> > Anybody has an idea how to release? Maybe contact spray?
> > Are the contactor accesible by opening the unit?
> >
>
> The contacts are inside the socket. You can change the socket. You can
> try the things mentioned in miklor FAQ 8.1 at the page below.
>
> You could put solder on the socket leads as shown in the attached
> photo that was provided by Baofeng to someone else that had this issue
> (the picture was from 2014 or earlier so the board may be different on
> newer radios. try it at your own risk).
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to amnon at amnon.zohar at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com



-- 
Amnon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20181113/8385ad19/attachment.html