[chirp_users] problem with baofeng uv-5r

[Amnon Zohar]

this solution makes both mics work in paralel when an external mic is used

‫בתאריך יום ג׳, 13 בנוב׳ 2018 ב-1:31 מאת ‪Amnon Zohar‬‏ <‪
amnon.zohar at gmail.com‬‏>:‬

> there is a yotube video for the solution
> https://www.youtube.com/watch?v=cf1VVN_0m3s
>
> ‫בתאריך יום ג׳, 13 בנוב׳ 2018 ב-1:00 מאת ‪Jim Unroe‬‏ <‪
> rock.unroe at gmail.com‬‏>:‬
>
>> On Mon, Nov 12, 2018 at 5:02 PM Amnon Zohar <amnon.zohar at gmail.com>
>> wrote:
>> >
>> > Anybody has an idea how to release? Maybe contact spray?
>> > Are the contactor accesible by opening the unit?
>> >
>>
>> The contacts are inside the socket. You can change the socket. You can
>> try the things mentioned in miklor FAQ 8.1 at the page below.
>>
>> You could put solder on the socket leads as shown in the attached
>> photo that was provided by Baofeng to someone else that had this issue
>> (the picture was from 2014 or earlier so the board may be different on
>> newer radios. try it at your own risk).
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to amnon at amnon.zohar at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
> --
> Amnon
>


-- 
Amnon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20181113/ca94705a/attachment.html