[chirp_users] problem with baofeng uv-5r

Jim Unroe
Mon Nov 12 14:54:39 PST 2018


On Mon, Nov 12, 2018 at 5:02 PM Amnon Zohar <amnon.zohar at gmail.com> wrote:
>
> Anybody has an idea how to release? Maybe contact spray?
> Are the contactor accesible by opening the unit?
>

The contacts are inside the socket. You can change the socket. You can
try the things mentioned in miklor FAQ 8.1 at the page below.

You could put solder on the socket leads as shown in the attached
photo that was provided by Baofeng to someone else that had this issue
(the picture was from 2014 or earlier so the board may be different on
newer radios. try it at your own risk).

Jim KC9HI
-------------- next part --------------
A non-text attachment was scrubbed...
Name: after welding.jpg
Type: image/jpeg
Size: 64134 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20181112/3a267ce7/attachment.jpg 


More information about the chirp_users mailing list