[chirp_users] Baofeng BF-F8HP

[Larry]

Try plugging the cable into a different USB port. 
WB2UFO 
Larry

On January 23, 2015 9:15:05 AM CST, Rick Osgood <rposgood at gmail.com> wrote:
>I have the cable branded Baofeng. I uninstalled the new version and
>installed v3.2.0.0. Following directions, I unplugged the usb cable,
>ran
>the install then plugged the cable back in. Windows did not even see
>that a
>new device has been introduced. I had to shave off a little of the
>connector that plugs into the radio or it would only go in half way. I
>am
>sure it is seated fully now....
>
>Help!
>
>On Fri, Jan 23, 2015 at 8:59 AM, Jim Unroe <rock.unroe at gmail.com>
>wrote:
>
>> On Fri, Jan 23, 2015 at 8:18 AM, Rick Osgood <rposgood at gmail.com>
>wrote:
>> > Is this model supported by Chirp or can I select a different model?
>> Windows
>> > 7 finally saw the usb connection and it is now listed as an unknown
>> device?
>> >
>> > Thanks for the great work!
>> >
>> > --
>> > Rick Osgood
>>
>> >From the Supported Radios list on the CHIRP home page...
>>
>> Baofeng/Pofung
>> BF-F8HP (in daily builds)
>>
>>
>> If you have a programming cable with a Prolific type chip, be sure to
>> downgrade your installed driver to v3.2.0.0.
>>
>> http://www.miklor.com/COM/UV_Drivers.php
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
>
>
>
>-- 
>Rick Osgood
>411 Walnut Street #9722
>Green Cove Springs, FL 34023
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150123/ada0dc94/attachment.html