[chirp_users] slow to populate

[K0LNY]

Absolutely, the same way I've been doing it with Chirp for years.
Glenn
----- Original Message ----- 
From: "Jim Unroe" <rock.unroe at gmail.com>
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Sent: Wednesday, May 24, 2023 11:56 AM
Subject: Re: [chirp_users] slow to populate


> On Tue, May 23, 2023 at 10:36 PM K0LNY <glenn at ervin.email> wrote:
>>
>> Well I thought copying and pasting worked, but nothing went into the 
>> radio,
>> that is why upload was available.
>> So back to opening the CSV file.
>> And it won't upload.
>> I took out the last entry, which was lower than 30 Mhz.
>> I'll attach my file if you can see what is wrong.
>> Chirp did originally tell me that I had 0.000 in a frequency spot, so I
>> fixed that, but it does not tell me of any errors now, it just won't 
>> upload.
>> Thanks.
>>
>> Glenn
>
> This CSV file loads almost instantly into my Windows 10 Pro 64-bit 
> computer.
>
> You do know that you cannot directly upload a CSV file into a "clone
> mode" radio, right? You must download from your radio (or load a
> previously saved CHIRP Radio Images (*.img) file that was created by
> downloading from your radio) to open a tab that is compatible with
> your radio. Then you have to copy-and-paste the memory rows from the
> CSV file tab to the tab from your radio. Once that is done, you can
> upload the tab from your radio back into your radio.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to K0LNY at glenn at ervin.email
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email 
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive: 
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com