[chirp_users] Problems with Tenway UV 82 Pro

[David Osborne]

I have tried several different ways to enter the values with no luck. Here
are the values.
QT/DQT Dec is 203.5
QT/DQT Enc is 203.5


On Sat, May 20, 2023, 9:57 AM Jim Unroe <rock.unroe at gmail.com> wrote:

> On Sat, May 20, 2023 at 10:27 AM David Osborne <dosborne1969 at gmail.com>
> wrote:
> >
> > Newbie here. I am trying to get some radios working for our VFD. It is a
> very small area, so we don't have a lot of money for radios.
> > I have all the frequencies from a neighboring VFD. Their radios are
> kenwood TK-5220.
> > My problem is that the RX and TX are different frequencies. I have used
> the split to put in the TX frequency. After sending to the Tenway UV 82
> Pro, I can receive voice, but I can not send voice.
> > The Kenwood file shows a QT/DQT Dec and a QT/DQT Enc value. I do not
> know where to put this info. in the chirp software.
> > Thanks for any help you can provide.
> > --
> > *David*
>
> They are the selective squelch (CTCSS tones and/or DCS codes) used by
> the VFD. They are set up in CHIRP using the Tone Mode and its
> associated fields. Without knowing what the QT/DQT Dec (receive) and
> QT/DQT Enc (transmit) values are, it isn't practical to tell you how
> to set them up in CHIRP.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to David at dosborne1969 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230521/01f81315/attachment.html