[chirp_users] Windows 11

[Tony Ling]

I would suggest junking Windows and replacing it with Ubuntu. It's not to
everybody's taste though.

On Wed, 5 Apr 2023 at 19:16, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Wed, Apr 5, 2023 at 1:06 PM Archie Miller <w6alm35 at gmail.com> wrote:
> >
> > Stumped.  Windows 11 apparently doesn't have the [ports which were in
> W-10, and it's not intuitive to add new ports. I had been using CHIRP with
> a Yeasu FT-60R and a Baofeng.
> > Suggestions?
>
> In this regard, Windows 11 works exactly the same as Windows 10 (and
> 8, 7, vista, etc). If you have a programming cable with a Prolific
> type USB-to-Serial chip you must download, install and select the
> older Prolific v3.2.0.0 device driver.
>
> https://www.miklor.com/COM/UV_Drivers.php
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tony Ling at tonyg7txu at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230405/ba4bf12b/attachment.html