[chirp_users] Windows 11

[Jim Unroe]

On Wed, Apr 5, 2023 at 1:06 PM Archie Miller <w6alm35 at gmail.com> wrote:
>
> Stumped.  Windows 11 apparently doesn't have the [ports which were in W-10, and it's not intuitive to add new ports. I had been using CHIRP with a Yeasu FT-60R and a Baofeng.
> Suggestions?

In this regard, Windows 11 works exactly the same as Windows 10 (and
8, 7, vista, etc). If you have a programming cable with a Prolific
type USB-to-Serial chip you must download, install and select the
older Prolific v3.2.0.0 device driver.

https://www.miklor.com/COM/UV_Drivers.php

Jim KC9HI