[chirp_users] Windows 10 and 11 S Mode

[Chuck Hast]

OK whatever. I will scrounge and keep my price down.

To each his own.

On Tue, Jan 25, 2022 at 9:32 PM Ken Hansen <ken at n2vip.org> wrote:

> Chuck,
>
> It seems you really want to convince me that monitors aren't expensive -
> I'm not sure why, since everything I've written is "+ monitor".
>
> Yes, people can use their home TVs.
>
> Yes, older computer displays are abundant and in many cases freely
> available.
>
> Your first post said:
>
> "And for the price of a RPi 400 you just need to add a screen and you are
> off to the races..."
>
> You left out PS, mouse, hdmi cable & microSD card, and adding those to a
> $70 RPi 400 takes you close to the $100 mark I mentioned.
>
> Ken, N2VIP
>
> On Jan 25, 2022, at 19:15, Chuck Hast <kp4djt at gmail.com> wrote:
>
> 
> Ken, in this case I do not have a junk box, but there is
> an IT recycler (actually several) in town and they all
> have monitors and are more than glad to part with them
> for a few $$. I think if people will look around they will
> find that most cities of any size will have them and a
> lot of computer shops end up with a collection of mon-
> itors for the which they will gladly part for a few $$.
>
> Even in more rural areas, I am going to bet that more
> than one shop has monitors that they would like to be
> rid of, they work but perhaps are not the best for the
> usual video but for a Chirp/ RPi setup they would
> work great.
>
> I see the IT recyclers here send them to grind up, so
> many monitors and so little space.  If they get a few
> $$ for them that is more than they get when they are
> sent to the grinder.
>
> When I talk about scrounging, it is not necessarily in
> my junk box, if people will look a wee bit they will find
> that there are a lot of ways to keep costs down. Most
> TV's have HDMI inputs now and for Chirp they work
> pretty well, even small ones.
>
> On Tue, Jan 25, 2022 at 2:45 PM Ken Hansen <ken at n2vip.org> wrote:
>
>> Chuck,
>>
>> My $100 number started with an RPi 400, not a 'traditional' RPI.
>>
>> RPi 400 - $70
>> Mouse - $7
>> Power adapter - $7
>> HDMI cable -$7 (microHDMI to standard HDBI)
>> Name-brand MicroSD card - $7
>>
>> That gives you $98 plus monitor, or simply get the RPi 400 'complete kit'
>> for $100 and get a nice book also.
>>
>> Substitute a 2 Gig RPi 4 (assuming you can find one):
>>
>> RPi - $45
>> Case for RPi 4 - $5
>> Keyboard - $20 (I too like Logitech K400)
>> Power adapter - $7
>> HDMI cable -$7 (microHDMI to standard HDBI)
>> Name-brand MicroSD card - $7
>>
>> That gets you to $91 plus monitor.
>>
>> Either path takes you close to $100, esp once you add in tax, s/h, etc.
>>
>> It's nice that you have a junk box that has all the needed items so you
>> can 'scrounge' them, but it's disingenuous to assume everyone else has a
>> similar junk box.
>>
>> Ken, N2VIP
>>
>> On Jan 25, 2022, at 06:14, Chuck Hast <kp4djt at gmail.com> wrote:
>>
>> 
>> I buy a Logitech K400 which has a touchpad on it for about $20
>> at Walmart or other places that sell them. I either use a repurposed
>> TV or go to the local IT recycler and get me a monitor for $5-$10.
>> You do not need that much SD card for Chirp so that will cost less
>> than $10. So far I still am not near $100. Part of being a ham is
>> learning to scrounge. Part of running a RPi is also learning to
>> scrounge.  For travel I carry a RPi the keyboard and an HDMI cable
>> and use the HDMI port on the TV in the hotel.
>>
>>
>> On Tue, Jan 25, 2022 at 12:46 AM Ken Hansen <ken at n2vip.org> wrote:
>>
>>> You need to add a screen, a mouse, a power supply, and an SD card.
>>>
>>> The screen can get pricey pretty fast - money saved by buying a smaller
>>> screen will soon be spent on a pair of 'readers' to use the smaller screen.
>>>
>>> I'm a big fan of RPi, but people like to gloss over the actual cost of
>>> such a setup.
>>>
>>> An RPi 400 (Pi in a keyboard) setup can easily run $100 + monitor,
>>> cheaper than a new laptop, but pretty close to low-end, off-lease corporate
>>> laptops.
>>>
>>> Ken, N2VIP
>>>
>>> > On Jan 24, 2022, at 10:00, Chuck Hast <kp4djt at gmail.com> wrote:
>>> >
>>> > And for the price
>>> > of a RPi 400 you just need to add a screen and you
>>> > are off to the races...
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Chuck Hast at kp4djt at gmail.com
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>
>>
>> --
>>
>> Chuck -- KP4DJT
>> HamHotline # 11259
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Ken Hansen at ken at n2vip.org
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chuck Hast at kp4djt at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
> --
>
> Chuck -- KP4DJT
> HamHotline # 11259
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ken Hansen at ken at n2vip.org
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Chuck Hast at kp4djt at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com



-- 

Chuck -- KP4DJT
HamHotline # 11259
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220125/01b6f5ce/attachment.html