[chirp_users] Kenwood Image

[K0LNY_Glenn]

Thanks Jim,
Actually, after turning off the radio again, and reconnecting, it now 
connected with both Chirp and the Kenwood software.
It must have been the PC setting in menu #9.
I changed a few settings with the Kenwood software and wrote that to the 
radio.
Now I'm working with Chirp, and if I can't get my CSV file to work, I'll try 
yours.
Thanks
----- Original Message ----- 
From: "Jim Unroe" <rock.unroe at gmail.com>
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Sent: Tuesday, August 09, 2022 12:16 PM
Subject: Re: [chirp_users] Kenwood Image


On Tue, Aug 9, 2022 at 11:26 AM K0LNY_Glenn <glenn at ervin.email> wrote:
>
> Actually, I used a Chirp CSV that I programmed into it a year or so back.
> I just added some channels.
> But it won't even do an import, so at that point, it hasn't seen the file.
> Glenn

How did you add the channels? I would expect that you used a text
editor or a spreadsheet program and "broke" the CHIRP compatibility.
Can you load the CSV file into CHIRP itself? Do you have a copy of the
CSV before you added the additional channels to see if that works?.

I have attached a valid CHIRP CSV file with 6 simplex channels. Try it.

Jim KC9HI



--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn at ervin.email
To unsubscribe, send an email to 
chirp_users-unsubscribe at intrepid.danplanet.com
To report this email as off-topic, please email 
chirp_users-owner at intrepid.danplanet.com
Searchable archive: 
https://www.mail-archive.com/chirp_users@intrepid.danplanet.com