[chirp_users] Fwd: chirp_users Digest, Vol 149, Issue 15
Steve Horning
Mon May 31 13:02:45 PDT 2021
More on this. I've just tried to save the TX frequencies by setting a
split. When I re-opened the file, all the settings were set back to "off".
On 5/31/2021 2:42 PM, Steve Horning wrote:
> Interesting. My the programming in CHIRP for my UV-5R stores/saves the
> offsets, but CHIRP is not "doing the math" or storing/saving the
> offsets with the GT-5R.
>
> From what I'm seeing, it's on the software side, not the radio side.
> After downloading the GT-5R's memory after a complete reset, I enter
> programming info for the radio, save it, close and reopen the file,
> and the offset field is set to "off".
>
>
> On 5/31/2021 2:00 PM, chirp_users-request at intrepid.danplanet.com wrote:
>> CHIRP lets the user enter the RX and TX frequencies as an RX
>> frequency, shift direction and offset, but then CHIRP does the math in
>> the background to determine the TX frequency. It is the RX frequency
>> and TX frequency that CHIRP stores in the CHIRP Radio Images (*.img)
>> file to be sent to the radio in that format because that is what the
>> radio requires.
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
More information about the chirp_users
mailing list