[chirp_users] Fwd: chirp_users Digest, Vol 149, Issue 15
Steve Horning
Mon May 31 12:42:48 PDT 2021
Interesting. My the programming in CHIRP for my UV-5R stores/saves the
offsets, but CHIRP is not "doing the math" or storing/saving the offsets
with the GT-5R.
From what I'm seeing, it's on the software side, not the radio side.
After downloading the GT-5R's memory after a complete reset, I enter
programming info for the radio, save it, close and reopen the file, and
the offset field is set to "off".
On 5/31/2021 2:00 PM, chirp_users-request at intrepid.danplanet.com wrote:
> CHIRP lets the user enter the RX and TX frequencies as an RX
> frequency, shift direction and offset, but then CHIRP does the math in
> the background to determine the TX frequency. It is the RX frequency
> and TX frequency that CHIRP stores in the CHIRP Radio Images (*.img)
> file to be sent to the radio in that format because that is what the
> radio requires.
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
More information about the chirp_users
mailing list