[chirp_users] FT-70D Port for Mac

[Nicolas Pike]

My only other immediate suggestion would be to restart Chirp.
Happy to discuss/help if I can off List
Nicolas

On Sat, 27 Mar 2021 at 11:26, Lawrence Underwood <lawrenceu at gmail.com>
wrote:

> Yes, I understand that.  When I put it into programming mode Chirp is not
> seeing the driver in the radio.  It did once.  Now it is not.
>
> On Mar 27, 2021, at 2:43 AM, Nicolas Pike <nicolas at jetblackjelly.com>
> wrote:
>
> The FT70 has a USB driver built in. Use the USB Cable that came with the
> radio, or a USB cable that fits correctly as the radio socket is recessed.
> The USB Port will not show up on your Mac until the Radio is in the
> correct state for programming.
> Follow the onscreen instructions exactly to ensure the radio is in the
> correct state for download.
> Happy to try and answer any further questions.
> Nicolas
>
> On Sat, 27 Mar 2021 at 01:27, Lawrence Underwood <lawrenceu at gmail.com>
> wrote:
>
>> I’m having to use an adapter to plug in the USB to the MacBook.  Could
>> that be affecting things?  When I enter the command in Terminal it says
>> there is no such file or directory.
>>
>> The odd thing is that when I use this adapter with the BaeFeng it works
>> just fine.
>>
>> Thanks again.
>>
>>
>> On Mar 26, 2021, at 8:08 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>
>> On Fri, Mar 26, 2021 at 8:57 PM Lawrence Underwood <lawrenceu at gmail.com>
>> wrote:
>>
>>
>> Do you know where I can download a driver?  Is it a FTDI cable or some
>> sort?
>>
>>
>>
>> On Mar 26, 2021, at 7:54 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>
>> On Fri, Mar 26, 2021 at 8:49 PM Lawrence Underwood <lawrenceu at gmail.com>
>> wrote:
>>
>>
>> I am on a MacBook Pro 13 running 11.2.3.
>>
>> When I attempt to download the radio to Chirp the port that is auto
>> populated is /dev/cu/.Bluetooth-Incoming-Port.
>> When I put the radio into ADMS mode and attempt to download it I get
>> ‘ERROR’ on the radio and a message stating that the radio did not respond
>> on Chirp.  I am using the cable supplied by Yaesu.
>>
>> Any ideas on how to get the radio to communicate with Chirp?
>>
>> Thanks.
>>
>>
>> See if this helps.
>> https://www.miklor.com/COM/UV_DriversMAC.php
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Lawrence at lawrenceu at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Nicolas at nicolas at jetblackjelly.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Lawrence at lawrenceu at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nicolas at nicolas at jetblackjelly.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210327/8114f74c/attachment.html