[chirp_users] FT-70D Port for Mac

[Lawrence Underwood]

Yes, I understand that.  When I put it into programming mode Chirp is not seeing the driver in the radio.  It did once.  Now it is not. 

> On Mar 27, 2021, at 2:43 AM, Nicolas Pike <nicolas at jetblackjelly.com> wrote:
> 
> The FT70 has a USB driver built in. Use the USB Cable that came with the radio, or a USB cable that fits correctly as the radio socket is recessed.
> The USB Port will not show up on your Mac until the Radio is in the correct state for programming.  
> Follow the onscreen instructions exactly to ensure the radio is in the correct state for download.
> Happy to try and answer any further questions.
> Nicolas 
> 
> On Sat, 27 Mar 2021 at 01:27, Lawrence Underwood <lawrenceu at gmail.com <mailto:lawrenceu at gmail.com>> wrote:
> I’m having to use an adapter to plug in the USB to the MacBook.  Could that be affecting things?  When I enter the command in Terminal it says there is no such file or directory. 
> 
> The odd thing is that when I use this adapter with the BaeFeng it works just fine.
> 
> Thanks again.
> 
> 
>> On Mar 26, 2021, at 8:08 PM, Jim Unroe <rock.unroe at gmail.com <mailto:rock.unroe at gmail.com>> wrote:
>> 
>> On Fri, Mar 26, 2021 at 8:57 PM Lawrence Underwood <lawrenceu at gmail.com <mailto:lawrenceu at gmail.com>> wrote:
>>> 
>>> Do you know where I can download a driver?  Is it a FTDI cable or some sort?
>>> 
>>> 
>>> 
>>>> On Mar 26, 2021, at 7:54 PM, Jim Unroe <rock.unroe at gmail.com <mailto:rock.unroe at gmail.com>> wrote:
>>>> 
>>>> On Fri, Mar 26, 2021 at 8:49 PM Lawrence Underwood <lawrenceu at gmail.com <mailto:lawrenceu at gmail.com>> wrote:
>>>>> 
>>>>> I am on a MacBook Pro 13 running 11.2.3.
>>>>> 
>>>>> When I attempt to download the radio to Chirp the port that is auto populated is /dev/cu/.Bluetooth-Incoming-Port.
>>>>> When I put the radio into ADMS mode and attempt to download it I get ‘ERROR’ on the radio and a message stating that the radio did not respond on Chirp.  I am using the cable supplied by Yaesu.
>>>>> 
>>>>> Any ideas on how to get the radio to communicate with Chirp?
>>>>> 
>>>>> Thanks.
>> 
>> See if this helps.
>> https://www.miklor.com/COM/UV_DriversMAC.php <https://www.miklor.com/COM/UV_DriversMAC.php>
>> 
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>> This message was sent to Lawrence at lawrenceu at gmail.com <mailto:lawrenceu at gmail.com>
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> This message was sent to Nicolas at nicolas at jetblackjelly.com <mailto:nicolas at jetblackjelly.com>
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>_______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Lawrence at lawrenceu at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210327/1307e09f/attachment.html