[chirp_users] FT-70D Port for Mac

[Nigel A. Gunn G8IFF/W8IFF]

Think the chip is emulated by the processor in the radio. The cable is a str8 USB cable.


> On 26/03/2021 20:56 Lawrence Underwood <lawrenceu at gmail.com> wrote:
> 
>  
> Do you know where I can download a driver?  Is it a FTDI cable or some sort?
> 
> 
> 
> > On Mar 26, 2021, at 7:54 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
> > 
> > On Fri, Mar 26, 2021 at 8:49 PM Lawrence Underwood <lawrenceu at gmail.com> wrote:
> >> 
> >> I am on a MacBook Pro 13 running 11.2.3.
> >> 
> >> When I attempt to download the radio to Chirp the port that is auto populated is /dev/cu/.Bluetooth-Incoming-Port.
> >> When I put the radio into ADMS mode and attempt to download it I get ‘ERROR’ on the radio and a message stating that the radio did not respond on Chirp.  I am using the cable supplied by Yaesu.
> >> 
> >> Any ideas on how to get the radio to communicate with Chirp?
> >> 
> >> Thanks.
> > 
> > You do not have a driver installed that is compatible with the chip in
> > your programming cable. When you choose the "Port", you will not
> > select anything that has "bluetooth" in the description.
> > 
> > Jim KC9HI
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Lawrence at lawrenceu at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net