[chirp_users] Kenwood TK-760H Radio Refuse...

[Mike Allred]

If there is a free and easy to use tool that I could use to capture that info while using the OEM software, I’d be glad to do so. 

> On Mar 18, 2021, at 11:51 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
> 
> On Thu, Mar 18, 2021 at 10:08 AM Mike Allred <mike at mallred.com> wrote:
>> 
>> OK...
>> 
>> Last night I got the OEM Kenwood programming software running using DOSBOX and it worked great with both radios (I have 2).  Of course, I would still like to get Chirp working.  But, this proves that the programming cable and radios are working correctly.
>> 
>> I have attached 2 additional debug logs.  One using the TK-760G profile in Chirp and one using the TK-762 profile.
>> 
>> The 760G profile seemed to do even less than the 760 profile as it didn't even put the radio in programming mode.
>> 
>> The 762 profile appears to have behaved exactly as the 760 profile did - radio goes into programming mode but Chirp errors out.
>> 
>> 
>> Mike
> 
> Unfortunately, neither debug.log file has captured any response from
> the radio. It is probably going to take capturing the serial port
> communications during the cloning process.
> 
> Jim
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Mike at mike at mallred.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com