[chirp_users] Kenwood TK-760H Radio Refuse...

Nigel A. Gunn G8IFF/W8IFF
Thu Mar 18 11:43:14 PDT 2021


If the radio's not responding, then there's no data to capture so no tool needed.

> On 18/03/2021 14:28 Mike Allred <mike at mallred.com> wrote:
> 
>  
> If there is a free and easy to use tool that I could use to capture that info while using the OEM software, I’d be glad to do so. 
> 
> > On Mar 18, 2021, at 11:51 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
> > 
> > On Thu, Mar 18, 2021 at 10:08 AM Mike Allred <mike at mallred.com> wrote:
> >> 
> >> OK...
> >> 
> >> Last night I got the OEM Kenwood programming software running using DOSBOX and it worked great with both radios (I have 2).  Of course, I would still like to get Chirp working.  But, this proves that the programming cable and radios are working correctly.
> >> 
> >> I have attached 2 additional debug logs.  One using the TK-760G profile in Chirp and one using the TK-762 profile.
> >> 
> >> The 760G profile seemed to do even less than the 760 profile as it didn't even put the radio in programming mode.
> >> 
> >> The 762 profile appears to have behaved exactly as the 760 profile did - radio goes into programming mode but Chirp errors out.
> >> 
> >> 
> >> Mike
> > 
> > Unfortunately, neither debug.log file has captured any response from
> > the radio. It is probably going to take capturing the serial port
> > communications during the cloning process.
> > 
> > Jim
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Mike at mike at mallred.com
> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net



More information about the chirp_users mailing list