[chirp_users] Kenwood TK-760H Radio Refuse...

[Jim Unroe]

On Thu, Mar 18, 2021 at 10:08 AM Mike Allred <mike at mallred.com> wrote:
>
> OK...
>
> Last night I got the OEM Kenwood programming software running using DOSBOX and it worked great with both radios (I have 2).  Of course, I would still like to get Chirp working.  But, this proves that the programming cable and radios are working correctly.
>
> I have attached 2 additional debug logs.  One using the TK-760G profile in Chirp and one using the TK-762 profile.
>
> The 760G profile seemed to do even less than the 760 profile as it didn't even put the radio in programming mode.
>
> The 762 profile appears to have behaved exactly as the 760 profile did - radio goes into programming mode but Chirp errors out.
>
>
> Mike

Unfortunately, neither debug.log file has captured any response from
the radio. It is probably going to take capturing the serial port
communications during the cloning process.

Jim