[chirp_users] Setting CTCSS or Tone Codes

John Elliott
Tue Jan 5 23:47:07 PST 2021

Nigel, thanks for that.  I have done so and they seem to work now.

On Tue, Jan 5, 2021 at 4:04 PM Nigel A. Gunn G8IFF/W8IFF <nigel at ngunn.net>

> You need to set to    Tone    to open repeaters. Forget the tone squelch,
> it's unlikely you have multiple repeaters on one frequency in your area.
> On 05/01/2021 18:54 John Elliott <kf7mue at gmail.com> wrote:
> I have completed these settings on my HAM radios just fine.  On the two
> GMRS-V1 and the GMRS 50X1 radios that I have, I was informed by those who
> have done it, to set the "Tone Mode" to "TSQL", the "Tone" to 141.3
> (example), the "ToneSql" to 141.3, and the "Cross Mode" to "Tone->Tone."
> The issue is, whenever I do this, the "Tone Mode" switches from "TSQL" now
> to "Cross" and the "Tone" is removed along with the "Tone->Tone".
> Can anyone tell me am I setting this up incorrectly?  When uploading it
> with only the "Tone Mode" to "TSQL" and only the "ToneSql" tone number,
> leaving the "Cross Mode" blank, the radios will not open the repeaters.
> --
> *Thanks, John KF7MUE*
> *GMRS-WRKD607*
> _______________________________________________ chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an
> email to chirp_users-unsubscribe at intrepid.danplanet.com
> Nigel A. Gunn, ///shoulders.outwards.resolutions   tel +1-937-971-0366
> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
> http://www.ngunn.net


*Thanks, John KF7MUE*

*GMRS-WRKD607Favorite Websiteshttp://www.highlinearc.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210105/3868222f/attachment.html 

More information about the chirp_users mailing list