[chirp_users] Port recognition issue

[K0LNY]

The way to tell which port is being used in Device Manager, is either plug in the cable with device manager open, and see what appears, or unplug the cord with device manager open, and see what goes away.
HTH.

Glenn
  ----- Original Message ----- 
  From: Dennis Mosley 
  To: Discussion of CHIRP 
  Sent: Wednesday, August 18, 2021 11:15 AM
  Subject: Re: [chirp_users] Port recognition issue


  Hmmm.  Device Manager says: Port_#0003.Hub_#0001

  When I copy and paste that into CHIRP I get an error message:
  could not open port Port_#0003.Hub_#0001: [Error 2] The system cannot find the file specified



  On Wed, Aug 18, 2021 at 11:16 AM Jim Unroe <rock.unroe at gmail.com> wrote:

    Hi Dennis,

    On Wed, Aug 18, 2021 at 11:03 AM Dennis Mosley <mdenmos6 at gmail.com> wrote:
    >
    > I downloaded CHIRP.  Plugged my computer cable to a USB port on my computer and got an Error 3 message saying this port is not recognized.  No driver.
    > I use this port all the time. I purchased the cable from Amazon as being the one to buy for my Btech 50+1 radio.

    > Help would be appreciated.--Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.


    You are most likely choosing the wrong port. Which port does Device Manager show as the port assigned to your programming cable? That is the one you must use.


    Jim KC9HI





    _______________________________________________
    chirp_users mailing list
    chirp_users at intrepid.danplanet.com
    http://intrepid.danplanet.com/mailman/listinfo/chirp_users
    This message was sent to Dennis Watt Mosley at mdenmos6 at gmail.com
    To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com




  -- 

  Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.



------------------------------------------------------------------------------


  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users
  This message was sent to K0LNY at glenn at ervin.email
  To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210818/3e2a198d/attachment.html