[chirp_users] Import for BaoFeng UV9r

[Jerry]

Jim,
Thank you so very much!  

Jerry KB2GCG 


- "Defeat lasts one day, giving up lasts a lifetime."

> On Apr 13, 2021, at 10:18 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
> 
> On Tue, Apr 13, 2021 at 9:45 PM Jerry s <jerseyj at superlink.net> wrote:
>> 
>> Hi all,
>> 
>> I’m a new user of CHIRP. I hooked my radio to my Mac and had no problems reading the config and exporting it to a .csv file. I then updated the .csv file as per the attached file.
>> 
>> I’m getting an error saying no channels.
>> 
>> I’ve included the original export to CSV as well as the file I’m trying to import (Merged V1) .
>> 
>> Any clue would be appreciated.
>> 
>> Jerry KB2GCG
>> 
> 
> Problem #1
> 
> The file is double spaced. In other words there is a blank row between
> each data row that needs to be removed.
> 
> Problem #2
> 
> The Duplex field is populated with "(none)". The correct value for a
> simplex channel is nothing. In other words nothing should be between
> the commas.
> 
> Problem #3
> 
> There is no value for TStep in the Location 1 and Location 57 row.
> Even if TStep is not used for your radio, it is required to be in the
> CSV file.
> 
> Problem #4
> 
> Required data is missing from the Locatioin 55 and Location 56 rows.
> If you want memories 55 and 56 to be empty, leave them out.
> 
> 
> Repaired CSV file attached.
> 
> JIm KC9HI
> <Baofeng Initial Exportf Merged V1.1.csv>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jerry  at jerseyj at superlink.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com