[chirp_users] Yaesu FT8900R Cloning

[Jardy Dawson]

Yaesu does not have software. Are you referring to RT Systems software?


Sent from Yahoo Mail for iPhone


On Tuesday, September 8, 2020, 05:21, RODNEY MATHIS <ko4aie at gmail.com> wrote:

Morning, I find using the Yaesu software is better than CHIRP.
73Rodney 
On Mon, Sep 7, 2020, 8:52 PM Jim Unroe <rock.unroe at gmail.com> wrote:

On Mon, Sep 7, 2020 at 6:04 PM joe <joe at joeshapley.com> wrote:
>
> Thank you for your response.
>
> i do select the serial port (com port).
>
> I will I’ll have to research as I have never selected a USB port.  I just plug it in to the USB on the computer
>
> thanks again...stay safe and stay healthy
>
> joe


Joe,

You don't select a USB port. The radio uses serial communications. The
programming cable has a chip inside that when used with the
appropriate device driver installed in the Windows operating system,
creates a virtual serial port (COM port) for the programming software
to connect to. Follow the advice provided by Jardy in an earlier
reply.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Rodney at ko4aie at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72 at yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200908/4f6d8bac/attachment.html