[chirp_users] Yaesu FT8900R Cloning

[RODNEY MATHIS]

Morning, I find using the Yaesu software is better than CHIRP.

73
Rodney

On Mon, Sep 7, 2020, 8:52 PM Jim Unroe <rock.unroe at gmail.com> wrote:

> On Mon, Sep 7, 2020 at 6:04 PM joe <joe at joeshapley.com> wrote:
> >
> > Thank you for your response.
> >
> > i do select the serial port (com port).
> >
> > I will I’ll have to research as I have never selected a USB port.  I
> just plug it in to the USB on the computer
> >
> > thanks again...stay safe and stay healthy
> >
> > joe
>
>
> Joe,
>
> You don't select a USB port. The radio uses serial communications. The
> programming cable has a chip inside that when used with the
> appropriate device driver installed in the Windows operating system,
> creates a virtual serial port (COM port) for the programming software
> to connect to. Follow the advice provided by Jardy in an earlier
> reply.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Rodney at ko4aie at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200908/0bfa41b0/attachment.html