[chirp_users] chirp_users Digest, Vol 143, Issue 8
Nick
Tue Nov 17 19:19:28 PST 2020
Jim comes through again. Way to go Elmer.K7NQB 73
---------- Original Message ----------
From: Natalie Wren <nwren94805 at gmail.com>
To: chirp_users at intrepid.danplanet.com
Subject: Re: [chirp_users] chirp_users Digest, Vol 143, Issue 8
Date: Tue, 17 Nov 2020 19:01:59 -0800
thanks to all for advice re: programming my baofeng uv-5r+. Special thanks to Jim Unroe-i downloaded the older driver you recommended and also found that my two prong connection was not fully installed. That plus some VERY detailed and helpful directions for using CHIRP supplied by Rich AG6QR from a local ham club have me up and running. thanks again!natalie
On Wed, Nov 11, 2020 at 12:02 PM <chirp_users-request at intrepid.danplanet.com> wrote:Send chirp_users mailing list submissions to
chirp_users at intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
chirp_users-request at intrepid.danplanet.com
You can reach the person managing the list at
chirp_users-owner at intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."
Today's Topics:
1. patient help needed for newbie trying to program baofeng
uv-5r+ (Natalie Wren)
2. Re: patient help needed for newbie trying to program baofeng
uv-5r+ (Silverfox)
3. Re: patient help needed for newbie trying to program baofeng
uv-5r+ (Jim Unroe)
----------------------------------------------------------------------
Message: 1
Date: Tue, 10 Nov 2020 17:24:32 -0800
From: Natalie Wren <nwren94805 at gmail.com>
Subject: [chirp_users] patient help needed for newbie trying to
program baofeng uv-5r+
To: chirp_users at intrepid.danplanet.com
Message-ID:
<CANjMnp9KENfwGsqZsMzZdFKo48tDDjyp+-wgHRFFUCmo6wryvw at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
hi
i have downloaded chirp and the driver needed for the usb cable to my
windows 7 machine and can't get it to work. i keep getting a 'radio did not
respond' message.
thanks for anyone willing to help!
natalie
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201110/254fb56d/attachment-0001.html
------------------------------
Message: 2
Date: Tue, 10 Nov 2020 17:31:15 -0800
From: "Silverfox" <alan.r.hill at gmail.com>
Subject: Re: [chirp_users] patient help needed for newbie trying to
program baofeng uv-5r+
To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
Message-ID: <5fab3ee4.1c69fb81.5131e.1652 at mx.google.com>
Content-Type: text/plain; charset="utf-8"
Try running Chirp as administrator. Also, check the device manager and see if the software driver is registered under PORTS(COM & LPT). When you run Chirp it has to be set to match what is in the PORTS device manager settings.
Alan ? W6ARH
From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Natalie Wren
Sent: Tuesday, November 10, 2020 5:25 PM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] patient help needed for newbie trying to program baofeng uv-5r+
hi
i have downloaded chirp and the driver needed for the usb cable to my windows 7 machine and can't get it to work. i keep getting a 'radio did not respond' message.
thanks for anyone willing to help!
natalie
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201110/b72e0818/attachment-0001.html
------------------------------
Message: 3
Date: Tue, 10 Nov 2020 20:36:17 -0500
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] patient help needed for newbie trying to
program baofeng uv-5r+
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
<CADnO8U7zHbBVXJfwZR=mk7AhSm_w7WnC_HaMixhi+wTuC0zeDw at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Hi Natalie,
On Tue, Nov 10, 2020 at 8:26 PM Natalie Wren <nwren94805 at gmail.com> wrote:
>
> hi
> i have downloaded chirp and the driver needed for the usb cable to my windows 7 machine and can't get it to work. i keep getting a 'radio did not respond' message.
>
> thanks for anyone willing to help!
> natalie
The #1 cause is an incompatible device driver is installed for the
chip in the programming cable. Which chip is in your programming cable
(check Device Manager)? If it is detected as a Prolific type chip, you
must download, install and select the older, but compatible, Prolific
v3.2.0.0 device driver.
http://www.miklor.com/COM/UV_Drivers.php
The #2 cause is a poor connection between the 2-pin plug of the
programming cable and the socket of the radio. Some users have had to
press on the plug during the cloning process.
Jim KC9HI
------------------------------
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
End of chirp_users Digest, Vol 143, Issue 8
*******************************************
____________________________________________________________
Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more
Fraud Suspect Attempts Very Unusual Getaway
http://thirdpartyoffers.netzero.net/TGL3231/5fb49307f3ea713071430st01duc1
Second Georgia County Finds Uncounted Votes
http://thirdpartyoffers.netzero.net/TGL3231/5fb4930823e4a13071430st01duc2
Report: Giuliani Asked to Be Paid $20K a Day
http://thirdpartyoffers.netzero.net/TGL3231/5fb493084864b13071430st01duc3
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201118/3b7494c0/attachment.html
More information about the chirp_users
mailing list