<html><div>Jim comes through again. Way to go Elmer.</div>
<div>K7NQB 73<br><br>---------- Original Message ----------<br>From: Natalie Wren <nwren94805@gmail.com><br>To: chirp_users@intrepid.danplanet.com<br>Subject: Re: [chirp_users] chirp_users Digest, Vol 143, Issue 8<br>Date: Tue, 17 Nov 2020 19:01:59 -0800<br><br></p>
<div dir="ltr">
<div>thanks to all for advice re: programming my baofeng uv-5r+. Special thanks to Jim Unroe-i downloaded the older driver you recommended and also found that my two prong connection was not fully installed. That plus some VERY detailed and helpful directions for using CHIRP supplied by Rich AG6QR from a local ham club have me up and running.</div>
<div> </div>
<div>thanks again!</div>
<div>natalie</div>
</div>
<p> </p>
<div class="gmail_quote">
<div class="gmail_attr" dir="ltr">On Wed, Nov 11, 2020 at 12:02 PM <<a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank">chirp_users-request@intrepid.danplanet.com</a>> wrote:</div>
<blockquote class="gmail_quote" style="margin: 0px 0px 0px 0.8ex; border-left: 1px solid #cccccc; padding-left: 1ex;">Send chirp_users mailing list submissions to<br> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br> <br> To subscribe or unsubscribe via the World Wide Web, visit<br> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br> or, via email, send a message with subject or body 'help' to<br> <a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank">chirp_users-request@intrepid.danplanet.com</a><br> <br> You can reach the person managing the list at<br> <a href="mailto:chirp_users-owner@intrepid.danplanet.com" target="_blank">chirp_users-owner@intrepid.danplanet.com</a><br> <br> When replying, please edit your Subject line so it is more specific<br> than "Re: Contents of chirp_users digest..."<br> <br> <br> Today's Topics:<br> <br> 1. patient help needed for newbie trying to program baofeng<br> uv-5r+ (Natalie Wren)<br> 2. Re: patient help needed for newbie trying to program baofeng<br> uv-5r+ (Silverfox)<br> 3. Re: patient help needed for newbie trying to program baofeng<br> uv-5r+ (Jim Unroe)<br> <br> <br> ----------------------------------------------------------------------<br> <br> Message: 1<br> Date: Tue, 10 Nov 2020 17:24:32 -0800<br> From: Natalie Wren <<a href="mailto:nwren94805@gmail.com" target="_blank">nwren94805@gmail.com</a>><br> Subject: [chirp_users] patient help needed for newbie trying to<br> program baofeng uv-5r+<br> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br> Message-ID:<br> <<a href="mailto:CANjMnp9KENfwGsqZsMzZdFKo48tDDjyp%2B-wgHRFFUCmo6wryvw@mail.gmail.com" target="_blank">CANjMnp9KENfwGsqZsMzZdFKo48tDDjyp+-wgHRFFUCmo6wryvw@mail.gmail.com</a>><br> Content-Type: text/plain; charset="utf-8"<br> <br> hi<br> i have downloaded chirp and the driver needed for the usb cable to my<br> windows 7 machine and can't get it to work. i keep getting a 'radio did not<br> respond' message.<br> <br> thanks for anyone willing to help!<br> natalie<br> -------------- next part --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201110/254fb56d/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201110/254fb56d/attachment-0001.html</a> <br> <br> ------------------------------<br> <br> Message: 2<br> Date: Tue, 10 Nov 2020 17:31:15 -0800<br> From: "Silverfox" <<a href="mailto:alan.r.hill@gmail.com" target="_blank">alan.r.hill@gmail.com</a>><br> Subject: Re: [chirp_users] patient help needed for newbie trying to<br> program baofeng uv-5r+<br> To: "'Discussion of CHIRP'" <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>><br> Message-ID: <<a href="mailto:5fab3ee4.1c69fb81.5131e.1652@mx.google.com" target="_blank">5fab3ee4.1c69fb81.5131e.1652@mx.google.com</a>><br> Content-Type: text/plain; charset="utf-8"<br> <br> Try running Chirp as administrator. Also, check the device manager and see if the software driver is registered under PORTS(COM & LPT). When you run Chirp it has to be set to match what is in the PORTS device manager settings.<br> Alan ? W6ARH<br> <br> <br> From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank">chirp_users-bounces@intrepid.danplanet.com</a> [mailto:<a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank">chirp_users-bounces@intrepid.danplanet.com</a>] On Behalf Of Natalie Wren<br> Sent: Tuesday, November 10, 2020 5:25 PM<br> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br> Subject: [chirp_users] patient help needed for newbie trying to program baofeng uv-5r+<br> <br> hi<br> i have downloaded chirp and the driver needed for the usb cable to my windows 7 machine and can't get it to work. i keep getting a 'radio did not respond' message.<br> <br> thanks for anyone willing to help!<br> natalie<br> -------------- next part --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201110/b72e0818/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201110/b72e0818/attachment-0001.html</a> <br> <br> ------------------------------<br> <br> Message: 3<br> Date: Tue, 10 Nov 2020 20:36:17 -0500<br> From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><br> Subject: Re: [chirp_users] patient help needed for newbie trying to<br> program baofeng uv-5r+<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>><br> Message-ID:<br> <CADnO8U7zHbBVXJfwZR=<a href="mailto:mk7AhSm_w7WnC_HaMixhi%2BwTuC0zeDw@mail.gmail.com" target="_blank">mk7AhSm_w7WnC_HaMixhi+wTuC0zeDw@mail.gmail.com</a>><br> Content-Type: text/plain; charset="UTF-8"<br> <br> Hi Natalie,<br> <br> On Tue, Nov 10, 2020 at 8:26 PM Natalie Wren <<a href="mailto:nwren94805@gmail.com" target="_blank">nwren94805@gmail.com</a>> wrote:<br> ><br> > hi<br> > i have downloaded chirp and the driver needed for the usb cable to my windows 7 machine and can't get it to work. i keep getting a 'radio did not respond' message.<br> ><br> > thanks for anyone willing to help!<br> > natalie<br> <br> The #1 cause is an incompatible device driver is installed for the<br> chip in the programming cable. Which chip is in your programming cable<br> (check Device Manager)? If it is detected as a Prolific type chip, you<br> must download, install and select the older, but compatible, Prolific<br> v3.2.0.0 device driver.<br> <br> <a href="http://www.miklor.com/COM/UV_Drivers.php" target="_blank" rel="noreferrer">http://www.miklor.com/COM/UV_Drivers.php</a><br> <br> The #2 cause is a poor connection between the 2-pin plug of the<br> programming cable and the socket of the radio. Some users have had to<br> press on the plug during the cloning process.<br> <br> Jim KC9HI<br> <br> <br> ------------------------------<br> <br> _______________________________________________<br> chirp_users mailing list<br> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br> To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a><br> <br> End of chirp_users Digest, Vol 143, Issue 8<br> *******************************************</blockquote>
</div></html>
<br><br><font SIZE="2" color="#000000">____________________________________________________________</font><br><br><font face="Arial"><font color="#000000" size="2">Top News - <a style="TEXT-DECORATION: none" href="https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more" target=_blank>Sponsored By Newser</font><ul><li><a style="TEXT-DECORATION: none" href="http://thirdpartyoffers.netzero.net/TGL3232/5fb49307f3ea713071430st01duc1" target=_blank><font color="#004080" size="2"><b>Fraud Suspect Attempts Very Unusual Getaway</b></font></a></li><li><a style="TEXT-DECORATION: none" href="http://thirdpartyoffers.netzero.net/TGL3232/5fb4930823e4a13071430st01duc2" target=_blank><font color="#004080" size="2"><b>Second Georgia County Finds Uncounted Votes</b></font></a></li><li><a style="TEXT-DECORATION: none" href="http://thirdpartyoffers.netzero.net/TGL3232/5fb493084864b13071430st01duc3" target=_blank><font color="#004080" size="2"><b>Report: Giuliani Asked to Be Paid $20K a Day</b></font></a></li></ul></font>