[chirp_users] UV-5R

[Roger Hill]

In the list of ports look for something like ttyUSB0...and use that one.
Roger
G3YTN

⁣Get BlueMail for Android ​

On 17 Mar 2020, 16:39, at 16:39, Joel Leland <jfleland at gmail.com> wrote:
>Hello,
>
>I have 2 UV-5R's, Baofeng, which I am attempting to program with a
>linux,
>Zorinos, and a Retevis cable, which I bought with the radios. I have
>programmed these radios before using a windows laptop. Now I am unable
>to
>get the radio to communicate with CHIRP. It goes into clone mode and
>then I
>get a "Radio did not respond" error message. This is using /dev/ttyS4,
>which is the first one I got a response from.
>I am very much the n00b to linux and CHIRP and could use some clear
>directions please.
>
>Thank you,
>-- 
>Joel F. Leland
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Roger at rhill at hillconsult.com
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200317/4ffd2ca0/attachment.html