[chirp_users] UV-5R

[Joel Leland]

All the way at the bottom of the list. It worked!

Thank you so much.

On Tue, Mar 17, 2020, 17:43 Roger Hill <rhill at hillconsult.com> wrote:

> In the list of ports look for something like ttyUSB0...and use that one.
> Roger
> G3YTN
>
> Get BlueMail for Android <http://www.bluemail.me/r?b=15824>
> On 17 Mar 2020, at 16:39, Joel Leland <jfleland at gmail.com> wrote:
>>
>> Hello,
>>
>> I have 2 UV-5R's, Baofeng, which I am attempting to program with a linux,
>> Zorinos, and a Retevis cable, which I bought with the radios. I have
>> programmed these radios before using a windows laptop. Now I am unable to
>> get the radio to communicate with CHIRP. It goes into clone mode and then I
>> get a "Radio did not respond" error message. This is using /dev/ttyS4,
>> which is the first one I got a response from.
>> I am very much the n00b to linux and CHIRP and could use some clear
>> directions please.
>>
>> Thank you,
>> --
>> Joel F. Leland
>>
>> ------------------------------
>>
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Roger at rhill at hillconsult.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Joel at jfleland at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200317/f88495ee/attachment.html