[chirp_users] UV50X2

[Darby Collier]

Sorry set them both to ch 15, or to two other valid channels? Also thank
you for your Elmers patience.

On Sun, Nov 24, 2019 at 18:59 Jim Unroe <rock.unroe at gmail.com> wrote:

> On Sun, Nov 24, 2019 at 9:17 PM Darby Collier <collier.darby at gmail.com>
> wrote:
> >
> > Okay Jim,
> >
> > I did a factory upload from the stock image.
> >
> > Then I uploaded the "Uploaded" image attached.  I did not touch the
> radio at all, then within less than a minute, downloaded the attached
> "Downloaded" image.  As you can see, the radio once again changed the
> programming with no input from me. I'm at a loss. Should I try the same
> thing with the stock image and see if it changes that as well?
> >
>
> Darby,
>
> There is no point to uploading the "stock" image if you follow it up
> by another image. The last image uploaded "wins".
>
> Anyway it seems that the radio have some bits stuck in its memory.
> After you uploaded your UPLOADED.img file setting MR A channel: to 0
> (0x0E9F = 0x00) and MR B channel: to 1 (0x0EA0 = 0x01) they come back
> to CHIRP as being set to 191 (0xBF) and 144 (0x90).
>
> What I would like you to try now would but to upload you UPLOADED.img
> file and then manually set MR A channel: and MR B channel: to some
> other valid channels numbers and then download from the radio and send
> that to me to see what they come back as. Set them both to channel 15.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to DarbyInGreen at collier.darby at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20191124/3ce86970/attachment.html