[chirp_users] UV50X2

[Jim Unroe]

On Sun, Nov 24, 2019, 4:16 PM Darby Collier <collier.darby at gmail.com> wrote:

> Trying to program Uv50X2 and since this last update,  it will not offer
> the option to set any of the menu items anymore such as scanning options
> etc. It will take the programming of channels and names but does not offer
> any menu options. Then when I revert to an old img file, it does not
> recognized the menu items that are in place from before so the channels I
> program via work mode do not program. I've tried doing a reset of both
> "ALL" and "VFO" only via the onboard menu but it still is not doing a hard
> factory reset. Help!!!!
>

Hi Darby,

Your radio has flipped a bit in memory that has caused 1or more settings to
be out-of-range.

Email a CHIRP Radio Images (*.img) to me or attach it here and I will
correct it and send it back to you.

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20191124/e7c59fd5/attachment.html