[chirp_users] UV50X2

[Darby Collier]

Jim,

Thanks for the reply. I installed the factory image and then programmed
with the "uploaded" file attached. I can modify the menu items now, but it
does not take properly. Specifically, in Work Mode settings, I am
programming 2m calling and 70c calling for A and B.

As you can see in the "downloaded" file attached, it takes programming for
work mode settings of C and D without issue, but keeps changing A and B to
channel 0/N5TEN on the display, even though that is not what I am uploading
AND it changes them both in the work mode setting to channels that I do not
even have programmed so that doesn't even match the displayed channels.
I've never had issues with this or any of the other BTech stuff, or with
CHIRP.  Thank you!!!

-Darby

On Sun, Nov 24, 2019 at 3:22 PM Jim Unroe <rock.unroe at gmail.com> wrote:

>
>
> On Sun, Nov 24, 2019, 4:16 PM Darby Collier <collier.darby at gmail.com>
> wrote:
>
>> Trying to program Uv50X2 and since this last update,  it will not offer
>> the option to set any of the menu items anymore such as scanning options
>> etc. It will take the programming of channels and names but does not offer
>> any menu options. Then when I revert to an old img file, it does not
>> recognized the menu items that are in place from before so the channels I
>> program via work mode do not program. I've tried doing a reset of both
>> "ALL" and "VFO" only via the onboard menu but it still is not doing a hard
>> factory reset. Help!!!!
>>
>
> Hi Darby,
>
> Your radio has flipped a bit in memory that has caused 1or more settings
> to be out-of-range.
>
> Email a CHIRP Radio Images (*.img) to me or attach it here and I will
> correct it and send it back to you.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to DarbyInGreen at collier.darby at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20191124/d3e32bde/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: UPLOADED.img
Type: application/octet-stream
Size: 16545 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20191124/d3e32bde/attachment.img 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DOWNLOADED.img
Type: application/octet-stream
Size: 16545 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20191124/d3e32bde/attachment-0001.img