[chirp_users] UV-82HP display question

Tom Balaban
Fri May 17 12:13:46 PDT 2019

Hi Dan,

I may have mildly misspoke. I know it can be done manually but I think 
it would be very difficult, if not impossible to get CHIRP to do it. 
Sorry for any confusion.


------ Original Message ------
From: "Dan Jolley" <danjolley at hotmail.com>
To: "chirp_users at intrepid.danplanet.com" 
<chirp_users at intrepid.danplanet.com>
Sent: 5/17/2019 3:01:42 PM
Subject: Re: [chirp_users] UV-82HP display question

>Thanks Charles & Tom, I have tried so many combinations in Chirp and 
>I've also watched some YouTube videos, none of them have shown that 
>capability. I couldn't get it to do it in Chirp either.
>It sure would be nice to have that feature! Anyway, if I knew someone 
>that knew how to do that it would be ya'll!
>Thanks again,
>Dan Jolley
>From: Dan Jolley
>Sent: Friday, May 17, 2019 1:13 PM
>To:chirp_users at intrepid.danplanet.com
>Subject: UV-82HP display question
>I have a UV-82HP, and I would like the top line to say the channel 
>name, and on the bottom line I would like it to show the correct 
>frequency of the channel I am on. Example: If I am on NOAA on the top 
>line I would like it to show 162.525 on the bottom line. Which is the 
>NOAA frequency in our area.
>I also have a UV-82C, UV-5R and a UV-5RTP I would like to do the same 
>thing to (if possible).
>Is this possible? I have done so many google searches and read a bunch 
>of articles. One man said he had his radio this way, but did not say 
>how he did it.
>I have been playing around with the Settings in Chirp and I have the 
>Name on the top line, but can't get the correct frequency on the bottom 
>Thank you in advance,
>Dan Jolley
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190517/f4f5cb13/attachment.html 

More information about the chirp_users mailing list