[chirp_users] UV-82HP display question

Dan Jolley
Fri May 17 12:21:56 PDT 2019

No problem Tom. I watched a guy do something like that on the keypad on a YouTube video, but it wasn't the display I had in mind. Plus he didn't explain a lot, especially which keys he pressed on the keyboard.

From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of Tom Balaban <mototom800 at gmail.com>
Sent: Friday, May 17, 2019 2:13 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] UV-82HP display question

Hi Dan,

I may have mildly misspoke. I know it can be done manually but I think it would be very difficult, if not impossible to get CHIRP to do it. Sorry for any confusion.


------ Original Message ------
From: "Dan Jolley" <danjolley at hotmail.com<mailto:danjolley at hotmail.com>>
To: "chirp_users at intrepid.danplanet.com" <chirp_users at intrepid.danplanet.com<mailto:chirp_users at intrepid.danplanet.com>>
Sent: 5/17/2019 3:01:42 PM
Subject: Re: [chirp_users] UV-82HP display question

Thanks Charles & Tom, I have tried so many combinations in Chirp and I've also watched some YouTube videos, none of them have shown that capability. I couldn't get it to do it in Chirp either.

It sure would be nice to have that feature! Anyway, if I knew someone that knew how to do that it would be ya'll!

Thanks again,
Dan Jolley
From: Dan Jolley
Sent: Friday, May 17, 2019 1:13 PM
To: chirp_users at intrepid.danplanet.com<mailto:chirp_users at intrepid.danplanet.com>
Subject: UV-82HP display question

I have a UV-82HP, and I would like the top line to say the channel name, and on the bottom line I would like it to show the correct frequency of the channel I am on. Example: If I am on NOAA on the top line I would like it to show 162.525 on the bottom line. Which is the NOAA frequency in our area.

I also have a UV-82C, UV-5R and a UV-5RTP I would like to do the same thing to (if possible).

Is this possible? I have done so many google searches and read a bunch of articles. One man said he had his radio this way, but did not say how he did it.

I have been playing around with the Settings in Chirp and I have the Name on the top line, but can't get the correct frequency on the bottom line.

Thank you in advance,
Dan Jolley
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190517/08a6d605/attachment.html 

More information about the chirp_users mailing list