[chirp_users] UV-82HP display question

[Dan Jolley]

Thanks Charles & Tom, I have tried so many combinations in Chirp and I've also watched some YouTube videos, none of them have shown that capability. I couldn't get it to do it in Chirp either.

It sure would be nice to have that feature! Anyway, if I knew someone that knew how to do that it would be ya'll!

Thanks again,
Dan Jolley
________________________________
From: Dan Jolley
Sent: Friday, May 17, 2019 1:13 PM
To: chirp_users at intrepid.danplanet.com
Subject: UV-82HP display question

I have a UV-82HP, and I would like the top line to say the channel name, and on the bottom line I would like it to show the correct frequency of the channel I am on. Example: If I am on NOAA on the top line I would like it to show 162.525 on the bottom line. Which is the NOAA frequency in our area.

I also have a UV-82C, UV-5R and a UV-5RTP I would like to do the same thing to (if possible).

Is this possible? I have done so many google searches and read a bunch of articles. One man said he had his radio this way, but did not say how he did it.

I have been playing around with the Settings in Chirp and I have the Name on the top line, but can't get the correct frequency on the bottom line.

Thank you in advance,
Dan Jolley
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190517/b11f5b81/attachment.html