[chirp_users] Transmit UV5r to FRS

D.J.J. Ring, Jr.
Thu Jun 20 15:11:10 PDT 2019


We also do not want to be accomplices in the commission of a crime.
§95.335   Operation of non-certified transmitters prohibited.

https://www.ecfr.gov/cgi-bin/text-idx?SID=513d144496fe583b1100416953ca419f&mc=true&node=se47.5.95_1335&rgn=div8


GMRS and FRS regulations have changed, but unlicensed FRS does not permit
any radio that has a removable antenna.  Also radios have to be certified
under FCC Part 95.  UV-5R isn't on the list, and FCC is planning on banning
the import of any radio capable of being used on a frequency that the unit
is not licensed for.  That is if it isn't an amateur radio, in the future
any radio imported will only be able to be used on amateur radio
frequencies.

Also in the near future, radios will not be legally allowed to be
manufactured, imported , or sold that can be used on BOTH GMRS and FRS.
This is going to cause a problem for licensed amateur radio operators  who
own such radios, like I do:
§95.1791   Sales of GMRS/FRS combination radios prohibited.

(a) Effective September 30, 2019, no person shall be permitted to
manufacture or import, sell or offer for sale any radio equipment capable
of operating under both this subpart (GMRS) and subpart B (FRS) of this
chapter.

FRS allows 2 watts or less on channels 1 – 7 and the previously GMRS only
channels of 15 – 22, but only 0.5 watts on channels 8 – 14.
GMRS licensees can use up to 50 watts, but there are somewhat complicated
restrictions and an FCC 10 year renewable license (good for entire family)
is needed. GMRS licensees can also operate on 8 additional repeater
frequencies.

The regulations for GMRS are quite complicated.
https://ecfr.io/Title-47/se47.5.95_11767

I think the past practice of this group not to provide such information to
unlicensed persons is a wise one.

73
David N1EA




On Thu, Jun 20, 2019 at 4:48 PM Glenn At Home <glennervin at cableone.net>
wrote:

> Let's not play police here.
> I do believe that the FCC has allowed some of the FRS frequencies, now up
> to 2 watts.
> To answer the question, make sure the same frequencies are in the column
> next to the receive column.
> I don't recall if they are labeled RX and TX or what.
> Glenn
>
> *From:* John Wuest <jhwuest at gmail.com>
> *Sent:* Thursday, June 20, 2019 3:42 PM
> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> *Subject:* Re: [chirp_users] Transmit UV5r to FRS
>
> Using your UV-5R on FRS frequencies will be a violation of Federal Law.
> That radio is not, nor can not be, type accepted for that service.
>
> On Thu, Jun 20, 2019 at 4:25 PM Todd J. Unkefer <tunkefer at gmail.com>
> wrote:
>
>> I can hear the FRS radios on their respective channels, I cannot transmit
>> on those respective channels. How can I enable the transmit on chirp?
>>
>> Thanks, in advance.
>>
>> Todd
>>
>>
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to John Wuest at jhwuest at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Glenn at glennervin at cableone.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190620/74397175/attachment.html 


More information about the chirp_users mailing list