[chirp_users] Transmit UV5r to FRS

[Glenn At Home]

Let's not play police here.
I do believe that the FCC has allowed some of the FRS frequencies, now up to 2 watts.
To answer the question, make sure the same frequencies are in the column next to the receive column.
I don't recall if they are labeled RX and TX or what.
Glenn


From: John Wuest 
Sent: Thursday, June 20, 2019 3:42 PM
To: Discussion of CHIRP 
Subject: Re: [chirp_users] Transmit UV5r to FRS


Using your UV-5R on FRS frequencies will be a violation of Federal Law. That radio is not, nor can not be, type accepted for that service.


On Thu, Jun 20, 2019 at 4:25 PM Todd J. Unkefer <tunkefer at gmail.com> wrote:

  I can hear the FRS radios on their respective channels, I cannot transmit on those respective channels. How can I enable the transmit on chirp?

  Thanks, in advance.

  Todd





  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users
  This message was sent to John Wuest at jhwuest at gmail.com
  To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190620/c690c58d/attachment.html