[chirp_users] Programming Wouxun KG-UV2D

Jim Dunham
Sun Feb 17 16:12:33 PST 2019


What about the radio model isn't in the software?

On Sun, Feb 17, 2019, 17:51 Jim Unroe <rock.unroe at gmail.com wrote:

> > If the cable is a USB, why are you using COM3?
>
> Because the programming cable is manufactured with a USB-to-Serial
> chip that, when used with a compatible device driver, creates a
> virtual COM port. This is necessary because virtually all radios
> programmed by CHIRP use serial communications and it is rare to see a
> modern computer with a legacy serial port.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jim at hondabones at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190217/ff779f7d/attachment.html 


More information about the chirp_users mailing list