[chirp_users] Chirp under Linux

[Pat Anderson]

Oops, I should have said I am running Ubuntu Linux. Can't say anything if
you are running something other than Linux.


On Sat, Dec 7, 2019 at 5:56 PM Pat Anderson <anderson5420 at gmail.com> wrote:

> Try this. Before you try to read from the radio, do "chmod 777
> /dev/ttyUSB0".  I have a Baofeng UV82HP and CHIRP reads and writes just
> fine once I have done this.
>
> Pat Anderson
> KD7OAC
>
> On Sat, Dec 7, 2019 at 5:48 PM Phil <phillor9 at gmail.com> wrote:
>
>> Thank you for reading this.
>>
>> I bought a Baofeng UV-82HP about four months ago and I cannot get Chirp
>> to read from the radio, or in fact to do anything with the radio.
>>
>> I'm running Chirp under Kubuntu and have tried every Chip daily version
>> over the past four months. This is the error message that I receive when
>> I attempt to read from the radio:
>>
>> "Radio did not respond"
>>
>> These are the entered parameters:
>>
>> /dev/ttyUSB0
>> Baofeng
>> UV-82HP
>>
>> I have read and write access to the serial port which is the same port
>> that I use for several application including programming an Arduino
>> board. I have tried several different Baofeng models, just in case, with
>> the same result.
>>
>> I've trimmed the plastic from the plug so that it slips into the radio's
>> sockets more easily. I've attempted to read from the radio in both
>> channel and frequency modes. Finally, I've searched the Internet for
>> even the slightest clue but to no avail.
>>
>> I do not know anyone who owns a Baofeng radio or who uses Chirp. So this
>> mailing list is my last hope.
>>
>> Any clues at all will greatly appreciated.
>>
>> --
>> Regards,
>> Phil
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Pat Anderson at anderson5420 at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20191207/2f76ea0e/attachment.html