[chirp_users] cloning cable wiring diagram

[Jardy]

Anybody using this cable would want to make sure both radios have the same firmware, otherwise you take a chance on bricking at least the receiving rig. 

Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator. 


> On Sep 15, 2018, at 13:17, Peter <ptlambert at sbcglobal.net> wrote:
> 
> I recently ordered this TENQ "cloning" cable from Amazon:
> 
> https://www.amazon.com/gp/product/B00MK02BX2
> 
> This cable has Kenwood style connectors (3.5mm TRS & 2.5mm TRS) on each end, for radio-to-radio configuration copy between Baofeng, Wouxun, and "any two-pin style radio with a Kenwood Baofeng plug".
> 
> I wanted to verify the pinout before adding it to my radio bag.         So I spent several hours scouring the Internet for a wiring diagram for such a cable, but with no success.  Even simple pinout descriptions were somewhat vague ("back-to-back", etc.).  So I ultimately buzzed out the cable with a DVM, tabulated the results, and mocked up a JPEG diagram based on an image that originally came from Miklor.com.  See attached for the finished product.  The diagram shows that the cable basically has Data Tx from one end connected to Data Rx on the other and vice-versa, with Data Ground connected between both ends.
> I wanted to submit this to John for possible inclusion on his site, but I don't see any contact form there.  I do know that he posts to this list so here I am...  John, if you are interested, feel free to re-post wherever you'd like, maybe here?
> 
> http://www.miklor.com/COM/UV_Technical.php
> 
> Cheers!
> (Peter)
> P.S. I do understand that this list is for CHIRP issues, hence any cable discussion would normally be limited to "programming" cables, e.g. Kenwood to USB with a suitable integrated controller chip.  However, I am thinking that this info might be useful to some folks here regardless.
> <clone cable wiring diagram.jpg>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180915/d236e2b1/attachment.html