[chirp_users] Programming a Baofeng GT3

[Calum Abernethy]

The problem is the ctcss codes on the Baofeng seem to increase by random
amounts ranging from 2.3 to 3.7 on the codes I have checked so far.

Calum

On Thu, 1 Nov 2018, 11:56 Amnon Zohar, <amnon.zohar at gmail.com> wrote:

> a step of 2.5 it compatible with a 12.5 step! 5 clicks to 1
>
> ‫בתאריך יום ה׳, 1 בנוב׳ 2018 ב-12:06 מאת ‪Calum Abernethy‬‏ <‪
> calum.abernethy at gmail.com‬‏>:‬
>
>> A few of questions on the above subject when using Chirp:-
>>
>> Can you confirm when setting the ctcss codes for transmit and receive you
>> use the columns 'tone' and 'tonesql' ?
>>
>> I have tried to set these columns to 67.0 but when uploaded to the radio
>> they get set to 118.8. How do I fix this?
>>
>> I am trying to set up my radios to to talk to a friends Motorola T80
>> using a PMR a channel with a ctcss sub code. The Motorola uses a step of
>> 12.5 on ctcss against an average of 2.5 on the Baofeng. Is there any way to
>> alter the step sequence on the Baofeng?
>>
>> Cheers
>>
>> Calum
>>
> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to amnon at amnon.zohar at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
> --
> Amnon
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Calum at calum.abernethy at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20181101/bded56c3/attachment.html