[chirp_users] Programming a Baofeng GT3

[Amnon Zohar]

a step of 2.5 it compatible with a 12.5 step! 5 clicks to 1

‫בתאריך יום ה׳, 1 בנוב׳ 2018 ב-12:06 מאת ‪Calum Abernethy‬‏ <‪
calum.abernethy at gmail.com‬‏>:‬

> A few of questions on the above subject when using Chirp:-
>
> Can you confirm when setting the ctcss codes for transmit and receive you
> use the columns 'tone' and 'tonesql' ?
>
> I have tried to set these columns to 67.0 but when uploaded to the radio
> they get set to 118.8. How do I fix this?
>
> I am trying to set up my radios to to talk to a friends Motorola T80 using
> a PMR a channel with a ctcss sub code. The Motorola uses a step of 12.5 on
> ctcss against an average of 2.5 on the Baofeng. Is there any way to alter
> the step sequence on the Baofeng?
>
> Cheers
>
> Calum
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to amnon at amnon.zohar at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com



-- 
Amnon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20181101/da1684cf/attachment.html