[chirp_users] (no subject)

[Jeff]

The CHIRP properties for channel 1 should be

Frequency: 170.100
Name: GAH
Tone Mode: blank
Tone: doesn't matter
ToneSql: 100.0
Cross Mode: Tone->Tone
DTCS stuff: doesn't matter
Duplex: split
Offset: 169.110
Mode: NFM
Skip: Blank
Power: High


On March 25, 2018 1:26:35 PM UTC, Kyle <kylezlucas at gmail.com> wrote:
>I am a newbie programming a UV-5r2+ using CHIRP.  Could you help me
>with how to fill in the fields in CHIRP?  I am going on a week long
>backcountry ski trip in British Columbia.  The operation area radio
>frequency given to me is attached below.  How do fill in the fields
>correctly listed in the screen shot of CHIRP below?  Or do I not have
>enough information?  I can’t figure out how to get the RX 170.100 and
>TX 169.110 on the same memory channel.  Then I am not sure if I am
>entering the tone correctly?
>Thank you!
>
>
> 
>CH>RX>TX>Band>User>Location>Tone - RX>Tone -
>TX>1>170.100>169.110>narrow>GAH>Cupola
>Mt>100.0> >2>170.100> >narrow>GAH> > > > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180327/22ee8c94/attachment.html