[chirp_users] DCS problem on BTECH UVX2-50

[ZIPPY]

YOU ASKED THIS 10 DAYS AGO????? MAYBE IT CAN'T BE DONE, TRY THE
BTECH WEBSITE.
----- Original Message ----- 
From: "Jean-Charles HUILLIER" <jchuillier at free.fr>
To: <chirp_users at intrepid.danplanet.com>
Sent: 29 June, 2018 01:23
Subject: [chirp_users] DCS problem on BTECH UVX2-50


> Hello all,
>
> This is not stricly Chirp related but I need you help on programming my
> radios with selective DCS.
>
> I use the radios in a car racing team and I need to be abe to talk to this
> car or that car but also to all the cars at the same time.
>
> I have made a setup which runs fine to speak to each car individualy but I
> can't talk to all of them at the same time, here's what I did.
>
> Same frequency for all channels
>
> DCS RX specific to each car (X for car 1, Y for car 2, etc.....)
> No DCS TX on the cars radios so that when the driver speaks everyone car
> hear it (except the other cars of course)
> I made several channels on the pit radios with a matching DCS TX for car
> 1, car 2 and no DCS at all to be able to talk to the other pits radios)
>
> I'd like to make a new DCS RX on all cars (200) so that I could talk to
> ALL cars at the same time but when I program it on the cars radios it does
> not work, the car does not receive it.
>
> I made a dual watch so that the car receiving radio should switch from the
> "this car only" channel to the "all cars channel" but somehow it does not
> receive.
>
> What did I do wrong ?
>
> Thanks for the help
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to ZIPPY at zip.doe at gmail.com
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com