[chirp_users] DCS problem on BTECH UVX2-50

[Jim Unroe]

> I made a dual watch so that the car receiving radio should switch from the
> "this car only" channel to the "all cars channel" but somehow it does not
> receive.

It won't work. These radios only have one receiver. Dual watch scans
between the 2 memory channels. I'd have to test it to know for sure,
but my guess is that dual watch is carrier based. Which ever memory
sees the signal first will cause scanning between the 2 memory
channels to stop. If scanning stops on the memory channel with per car
DCS code and you are transmitting with the all car DCS code, the
driver will hear nothing. If scanning stops on the memory channel with
the all car DCS code and you are transmitting with the per car DCS
code, the driver will hear nothing.

Jim