[chirp_users] Support for CS800D??

[William Liporace]

Good Morning,

Thanks for the info. I didn't look to see if other DMR radios were 
included or supported. Not a problem. I have the radio setup and I have 
a couple of codeplugs for the radio. I just liked the way that chirp 
works ;-)

TNX Will WC2L

On 12/25/2018 11:33 PM, Larry Howell wrote:
> Will,
>
> Chirp can only program analog radios.  The CS800D is DMR so you need a 
> code plug,  which is a fairly complex configuration file.  I'd suggest 
> searching online for "cs800d ciodeplug" to locate one and learn more 
> about DMR. I found one for my AT-868UV HT here and one for the CS800D 
> code plug can be found at http://arrl-ohio.org/digital/kb8lkh.html and 
> other sites.
>
> Larry AC8YE
>
> On Tue, Dec 25, 2018 at 10:23 PM William Liporace <wc2l at wc2l.com 
> <mailto:wc2l at wc2l.com>> wrote:
>
>     Hi Folks,
>     I have not looked too much online, but it does not appear that
>     anyone has setup the Chirp to work with the Connect System radios.
>     I happen to have picked up the CS800D. Please correct me if I am
>     wrong...
>
>     TNX Will WC2L
>
>     -- 
>     William Liporace WC2L
>     http://www.wc2l.com  orhttp://dxc.wc2l.com
>     AR-Cluster Node  telnetdxc.wc2l.com  <http://dxc.wc2l.com>  or 144.93 MHz
>     wc2l at wc2l.com  <mailto:wc2l at wc2l.com>
>
>     _______________________________________________
>     chirp_users mailing list
>     chirp_users at intrepid.danplanet.com
>     <mailto:chirp_users at intrepid.danplanet.com>
>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>     This message was sent to larry.howell.47 at gmail.com
>     <mailto:larry.howell.47 at gmail.com> at larry.howell.47 at gmail.com
>     <mailto:larry.howell.47 at gmail.com>
>     To unsubscribe, send an email to
>     chirp_users-unsubscribe at intrepid.danplanet.com
>     <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to wc2l at wc2l.com at wc2l at wc2l.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-- 
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com
AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
wc2l at wc2l.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20181226/512d655f/attachment.html