[chirp_users] Wouxun KG-UV8D Won't Open Squelch

Jeff
Mon Apr 2 09:16:44 PDT 2018


If  Cross Mode is other than Tone->Tone this could happen. And Tone Mode should be set to Tone of course.

On April 2, 2018 4:05:26 PM UTC, Joe Hobart <nova at npgcable.com> wrote:
>Chirp appears to program the KG-UV8D (Chirp reports software version
>UV8DV1.05),
>but received signals will not open the squelch.  I have to manually go
>to every
>channel in the radio and change either R-CTC or R-DCS before there is
>audio (the
>monitor button also works).  Three of these radios behave the same.  I
>have no
>other versions of Wouxan img files.
>
>Once I fiddle with the R-CTC or R-DCS settings the radios receive
>normally, but
>changing 100 channels in each of 3 radios would be tedious.
>
>Known history: These radios were purchased new, used for local
>communications,
>and retired with broken antennas.
>
>
>Chirp procedure using a recently updated Linux Mint version:
>
>There are no values visible in the Chirp spreadsheet for CTS or DCS.
>
>Download img file from Wouxan
>Delete old frequencies
>Add about 100 frequencies (copied from UV-5R file)
>Upload to same Wouxan
>
>What might I be doing wrong, and what can I do to correct this problem?
>
>Thanks,
>Joe, W7LUX
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Jeff at wireless3.14159 at gmail.com
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com



More information about the chirp_users mailing list