[chirp_users] Hesenate vhf/uhf

[Amnon Zohar]

Download from www.miklor.com

בתאריך 27 בנוב' 2017 22:24,‏ "Ray Nicholson" <nanapapanicholson at verizon.net>
כתב:

> shows error under other devices usb port no drivers available.  I will
> have to find a driver for the cable.
> Ray
>
>
> -----Original Message-----
> From: Amnon Zohar <amnon.zohar at gmail.com>
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Sent: Mon, Nov 27, 2017 2:00 pm
> Subject: Re: [chirp_users] Hesenate vhf/uhf
>
> Check on device mannager if the driver was properly installed.
>
> בתאריך 27 בנוב' 2017 19:01,‏ "Amnon Zohar" <amnon.zohar at gmail.com> כתב:
>
> No you download the driver for the cable and chose the radio model in chirp
>
> בתאריך 27 בנוב' 2017 18:57,‏ "Ray Nicholson" <
> nanapapanicholson at verizon.net> כתב:
>
> Hi Jim
> Yes my radio is the HT-UV8R.  When I connect the cable to the USB port
> device mgr. saysUSB serial port no driver available.  Search for drivers
> and get non.  If I connect radio to cable device mgr. remains the same.
> Where do I to install Baofeng as vender, when I search for driver?
> Ray  W3EGG
>
>
> -----Original Message-----
> From: Jim Unroe <rock.unroe at gmail.com>
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Sent: Sun, Nov 26, 2017 10:11 pm
> Subject: Re: [chirp_users] Hesenate vhf/uhf
>
> On Sun, Nov 26, 2017 at 2:15 PM, Ray Nicholson
> <nanapapanicholson at verizon.net> wrote:
> > Bought a Hesenate transceiver and cannot get to connect to PC. I also
> > purchased a Baofeng cable & downloaded CHIRP from the Chirp web site for
> > windows. Do I need a special driver for the software to connect or does
> it
> > come imbedded in the software? The spread sheet shows under file new but
> > cannot save entries made.
> > Ray
> >
>
> Hi Ray,
>
> You didn't say the model of the radio that you purchased so it may not
> be supported by CHIRP.
>
> No programming software will work if there is not a complete and
> working connection between the radio and computer. If the programming
> cable has a counterfeit Prolific, then you must download, install and
> select the older V3.2.0.0 device driver.
>
> If you have the HESENATE model HT-UV8R, then it looks like a BF-F8HP
> variant. Then you would select Baofeng as the Vendor and BF-F8HP as
> the Model.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ray at nanapapanicholson at verizon.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
> id.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to amnon at amnon.zohar at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
> id.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ray at nanapapanicholson at verizon.net
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to amnon at amnon.zohar at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20171127/b8a0a920/attachment.html