[chirp_users] Hesenate vhf/uhf

[Ray Nicholson]

shows error under other devices usb port no drivers available.  I will have to find a driver for the cable.
Ray



-----Original Message-----
From: Amnon Zohar <amnon.zohar at gmail.com>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Sent: Mon, Nov 27, 2017 2:00 pm
Subject: Re: [chirp_users] Hesenate vhf/uhf



Check on device mannager if the driver was properly installed.


בתאריך 27 בנוב' 2017 19:01,‏ "Amnon Zohar" <amnon.zohar at gmail.com> כתב:

No you download the driver for the cable and chose the radio model in chirp


בתאריך 27 בנוב' 2017 18:57,‏ "Ray Nicholson" <nanapapanicholson at verizon.net> כתב:

Hi Jim
Yes my radio is the HT-UV8R.  When I connect the cable to the USB port device mgr. saysUSB serial port no driver available.  Search for drivers and get non.  If I connect radio to cable device mgr. remains the same.  Where do I to install Baofeng as vender, when I search for driver?
Ray  W3EGG



-----Original Message-----
From: Jim Unroe <rock.unroe at gmail.com>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Sent: Sun, Nov 26, 2017 10:11 pm
Subject: Re: [chirp_users] Hesenate vhf/uhf

On Sun, Nov 26, 2017 at 2:15 PM, Ray Nicholson
<nanapapanicholson at verizon.net> wrote:
> Bought a Hesenate transceiver and cannot get to connect to PC.  I also
> purchased a Baofeng cable & downloaded CHIRP from the Chirp web site for
> windows.  Do I need a special driver for the software to connect or does it
> come imbedded in the software?  The spread sheet shows under file new but
> cannot save entries made.
> Ray
>

Hi Ray,

You didn't say the model of the radio that you purchased so it may not
be supported by CHIRP.

No programming software will work if there is not a complete and
working connection between the radio and computer. If the programming
cable has a counterfeit Prolific, then you must download, install and
select the older V3.2.0.0 device driver.

If you have the HESENATE model HT-UV8R, then it looks like a BF-F8HP
variant. Then you would select Baofeng as the Vendor and BF-F8HP as
the Model.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ray at nanapapanicholson at verizon.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to amnon at amnon.zohar at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com




_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ray at nanapapanicholson at verizon.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20171127/3446d036/attachment.html