[chirp_users] Programming a BTECH UV-50X2

[Bob DeFranco]

Thanks, John. I was hoping that was the case. I will download the latest
version of Chirp and program my new radio when it arrives.

Bob DeFranco

On Mon, May 8, 2017 at 7:20 PM, John LaMartina <JohnLa at usa.net> wrote:

> There’s no risk at all. It’s just not mentioned on the CHIRP home page.
>
> John
> http://www.miklor.com
>
>
>
>
>
> *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *D.J.J. Ring,
> Jr.
> *Sent:* Monday, May 08, 2017 9:36 PM
> *To:* Discussion of CHIRP
> *Subject:* Re: [chirp_users] Programming a BTECH UV-50X2
>
>
>
> There's some mention of that model on this page:
>
>
>
> https://www.amazon.com/BTECH-MOBILE-UV-50X2-Mobile-Radio/dp/B06XK83VRV
>
>
>
>
>
> Only this models are officially supported:
>
> *BTECH*
>
>    - GMRS-V1
>    - UV-2501
>    - UV-2501+220
>    - UV-5001
>    - UV-50X3
>    - UV-5X3
>
> It's your radio, if you want to take the risk using CHIRP on an
> unsupported radio, go ahead.  The worst that could happen is that you
> convert a functioning radio into a brick of non functioning plastic.  You
> can always buy a new radio.
>
>
>
> 73
>
>
>
> David N1EA
>
>
>
> On May 8, 2017 9:13 PM, "Bob DeFranco" <bob.defranco at gmail.com> wrote:
>
> I just ordered a BTECH UV-50X2 and was going to download the latest
> version of ChiRP to program it. Looking at the list of supported radios,
> however, I see the UV-50X3 and the UV-5001 (the predecessor to the UV-50X2)
> but not my radio. Which model should I select? I suppose I could just try
> different ones and see which works, but I worry about bricking the radio.
> Any advice?
>
>
>
> Bob DeFranco
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Bob DeFranco at bob.defranco at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170508/a540f102/attachment.html