[chirp_users] Programming a BTECH UV-50X2

[Amnon Zohar]

if you can download from the radio and it comes out ok i guess uploading
will not brick the radio....

2017-05-09 5:32 GMT+03:00 Bob DeFranco <bob.defranco at gmail.com>:

> Thanks, John. I was hoping that was the case. I will download the latest
> version of Chirp and program my new radio when it arrives.
>
> Bob DeFranco
>
> On Mon, May 8, 2017 at 7:20 PM, John LaMartina <JohnLa at usa.net> wrote:
>
>> There’s no risk at all. It’s just not mentioned on the CHIRP home page.
>>
>> John
>> http://www.miklor.com
>>
>>
>>
>>
>>
>> *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
>> chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *D.J.J. Ring,
>> Jr.
>> *Sent:* Monday, May 08, 2017 9:36 PM
>> *To:* Discussion of CHIRP
>> *Subject:* Re: [chirp_users] Programming a BTECH UV-50X2
>>
>>
>>
>> There's some mention of that model on this page:
>>
>>
>>
>> https://www.amazon.com/BTECH-MOBILE-UV-50X2-Mobile-Radio/dp/B06XK83VRV
>>
>>
>>
>>
>>
>> Only this models are officially supported:
>>
>> *BTECH*
>>
>>    - GMRS-V1
>>    - UV-2501
>>    - UV-2501+220
>>    - UV-5001
>>    - UV-50X3
>>    - UV-5X3
>>
>> It's your radio, if you want to take the risk using CHIRP on an
>> unsupported radio, go ahead.  The worst that could happen is that you
>> convert a functioning radio into a brick of non functioning plastic.  You
>> can always buy a new radio.
>>
>>
>>
>> 73
>>
>>
>>
>> David N1EA
>>
>>
>>
>> On May 8, 2017 9:13 PM, "Bob DeFranco" <bob.defranco at gmail.com> wrote:
>>
>> I just ordered a BTECH UV-50X2 and was going to download the latest
>> version of ChiRP to program it. Looking at the list of supported radios,
>> however, I see the UV-50X3 and the UV-5001 (the predecessor to the UV-50X2)
>> but not my radio. Which model should I select? I suppose I could just try
>> different ones and see which works, but I worry about bricking the radio.
>> Any advice?
>>
>>
>>
>> Bob DeFranco
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Bob DeFranco at bob.defranco at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to amnon at amnon.zohar at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>



-- 
Amnon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170509/dc5673a8/attachment.html